Travertine can be used while still in its natural state, but after it is laid, you will need to use a travertine sealer to make sure that water doesn’t seep into its crevices and holes. The holes in travertine tiles may be filled with epoxy before they are sent to your local landscaping design location, but some water can still find its way in if you don’t seal the tile. If you polish travertine that isn’t sealed, it won’t be as shiny as granite or marble, and the powders used to polish it may become accumulated in the holes, making the tiles difficult to clean. Be sure not to clean travertine with water pressure higher than 800 PSI, so that you don’t loosen the epoxy. Never use water under pressure to clean your travertine tiles if the grout is not in good condition.
Travertine is just one of several natural types of stones that can be used for garden paths and paving patios. It’s sometimes called travertine marble or travertine limestone. The stone has pitted troughs and holes in the surface, which is why it needs to be sealed when it is laid. You can polish it to a shiny, smooth finish, and the various colors from coral red to gray make for lovely floor installations.
Travertine can be etched when acids like those in juice and soft drinks are spilled on it, and chemical cleaners that are acid-based can also cause unwanted etching. Travertine absorbs liquids and oils, and is easier to stain than marble. If you use this type of stone in a wet room like a bathroom or kitchen, be sure to use a travertine sealer to keep the acids of everyday living out of its pores.
Travertine may occasionally be used for counter tops, but this is not a recommended usage, since it’s too easy to etch or scratch. It does work well as a flooring type, and it makes smaller areas look and feel larger than they are. Travertine surface finishes vary from stone to stone. Not all can be polished to a high gloss, only the harder stones. You’ll never find travertine that is as shiny as granite and marble.
Travertine is used in four finish types, those being tumbled, honed, brushed and polished. The type of surface stone used will determine how shiny – or dull – your floor will be. To clean travertine tiles, remember how porous they are. Treat the entire surface with a sealer, to protect it. This will fill in the pores and will repel surface spills, until you can wipe them off.
You’ll want to dust mop travertine floors indoors using a dry and non-treated mop. Grit, dirt and sand are damaging to surfaces of natural stone, since they are abrasive. Area rugs inside doors or doorways will help to keep down the amount of dirt and sand that is tracked into a room with a travertine floor. Make sure that the mat or rug’s underside is non-slip. You can vacuum travertine, but don’t use an older or well-worn vacuum, because the old brushes and pitted wheels may damage the surface. A travertine sealer will help to keep away a lot of the indoor hazards to the stone.
Search Terms: travertine sealer, Travertine Tile Sealer, travertine tile sealers, travertine sealers, travertine floor sealer, travertine sealant, what sealer to use on travertine, travertine tile sealant, sealers for travertine, sealers for travertine floors